Angle joints and clevises are used for making lever-controlled mechanisms, draw bars and gear changing mechanisms.

Design obrázek kategorie
Haberkorn s.r.o.
Generála Vlachého 305
747 62  Mokré Lazce
Czech republic
tel.: +420 553 757 112
fax: +420 553 757 127
Free lines for customers in Slovakia
tel.: 0800 042 204
fax: 0800 042 205
Standard parts » Joints
Oddělovací linka

Angle/axial joints, clevises and rod ends are most often used as a part of connecting rods and lever-controlled mechanisms.
The biggest advantage is the possibility to set easily any required connecting rod length by using adequate threaded rod with convenient joints on both sides.
Joints can be supplied with a galvanized surface or can be made from stainless steel. Angle joints are pre lubricated with grease and fitted with a safety pin.

Rod ends allow connection where the combination of linear and rotating/swinging movement is needed and they are available in different varieties specially designed for particular application.

Universal and shaft joints are used for the transmission of rotation movement and torque between the shafts whose axis does not lie in one line. Telescopic propeller shaft has the same principle of use, but the connected shafts may swap their positions during operation without interrupting the transmission of rotation movement from the driving shaft to the driven shaft.

Oddělovací linka

© copyright Haberkorn s.r.o.    |     Website map  Ikona Sitemap     |     Website text version  Ikona text     |     News subscription  Ikona News     |     RSS news  Ikona RSS     |     Facebook  Ikona Facebook     |     Google+  Ikona Google+