Modular belt conveyors

Advantages

• conveyors are manufactured according to customer requirements, ie. "made-to-measure"
• possibility to perform special technological and manufacturing operations directly on the conveyor (eg. blowing, degreasing, draining the oil into the tub under the conveyor, etc.)
• choice of four types of modular belt materials with different properties and areas of use (eg. food grade, oil resistant or adhesive, gray, blue, white)
• high service life of the belt
• various types of modular cells designed for a wide range of applications
• if the belt is damaged, only the damaged parts are replaced (in the long run a large saving of financial costs)
• conveyor skeleton made of item modular system profiles with the possibility of easily connecting other profiles or complementary technologies, possibility to modify the conveyor in the future
• silent operation that predestines the conveyors to be built into permanently installed assembly lines

Technical solution

• basic frame of conveyor made of aluminum groove profiles of the modular system item
• drive and driven plastic gears
• aluminum drive and driven sprockets with tilting ball bearings for adjusting and tilting the conveyor belt
• drive made up of a compact unit, consisting of a three-phase asynchronous electric motor and a worm gearbox. For heavier loads, use helical-bevel gears.
• modular strip in 1/2 "to 2" spacing modules connected to each other by rigid plastic rods. Belt materials: PP, PE, POM, PA - For a more detailed description of the belts, see chapter 10. Possibility of filling belts with transverse and longitudinal dampers.
• plastic sliding guide under the top belt belt to support and reduce friction
• support rollers of 50 mm diameter (Al or PVC) located under the lower belt section at longer conveyors (over 2 m) to prevent it from being slammed
• the speed is constant or can be controlled using a frequency inverter
• the base, as well as the base frame, made of aluminum grooved sections of the modular system item. The variant is also adjustable in height (manual, drive) or sloping design.
• delivery possible including electrical connection with motor starter or frequency inverter

Optional accessories

• electrical connection of conveyors including elements such as optical sensors with reflector, safety STOP buttons, frequency inverter, motor starter, etc.
• base
• motor 1 x 230 V
• plastic sliding guide with raised edges for material guidance
• side guides adjustable only horizontally or horizontally and vertically
• mechanical end stops

Realization