Stavebnicový systém MB 9 - EN

192 5 Rebate Profile a [mm] b [mm] q max. [N/m] 8 Al (M6; 19") 10.5 27.0 1,000 8 Al 16 (M5) 16.5 21.5 1,000 10 Al 10.5 36.5 1,200 2.5 18 (27.5) 8 Rebate Profile 8 Al Al, anodized m = 310 g/m natural, 1 pce., length 2000 mm 0.0.411.14 100 19x100 Rebate Profile 8 Al M6 Al, anodized Fully machined with 20 threads M6 incl. grub screws DIN 913-M6x12, St, bright zinc-plated m = 540.0 g natural, 1 pce., length 2000 mm 0.0.444.89 Rebate Profiles Al Fastening for panel elements, steps or devices installed between Profiles – the continuous Rebate Profile enables constructions that are virtually dust and dirt-tight, e.g. for panel elements, or can be used as a rebate strip for doors. Supports particularly high loads thanks to forces being trans- ferred along the entire length. ■ ■ The variable fastener for all types of elements ■ ■ Strong thanks to secure anchoring in the groove ■ ■ Suitable for use as a rebate strip for doors The Rebate Profile is rolled into the groove and fixed in position with grub screws. Rebate Profile 8 Al 16 M5, 8 Al M6 and 10 Al M6 are supplied with pre-tapped threaded bores and the cor- responding grub screws. Connection dimensions for the Rebate Profile Al to Profiles. Permissible linear load for Rebate Profiles. Rebate Profile 8 Al 19″ is used for fixing 19″ front plates or 19″ housings or other panel ele- ments. These are secured by Captive Nuts which can be inserted in the square openings of the Rebate Profile. 1 HU corresponds to a length of 44.45 mm P A N E L F A S T E N E R S