Stavebnicový systém MB 9 - EN

220 6 Fastening Set 8 for Hanger 8 Button-Head Screw ISO 7380-M8x25, St, bright zinc-pl. 2 spring washers, St, bright zinc-plated T-Slot Nut 8 St M8, bright zinc-plated m = 21.0 g 1 set 0.0.265.05 ⌀14.5/8.5 25 8 54.5 20 6.4 M6 Hanger 8 Hanger, die-cast zinc, black Hexagon Socket Head Cap Screw DIN 912-M6x16, St, bright zinc-plated Washer DIN 125-6.4 St, bright zinc-plated m = 87.0 g 1 set 0.0.196.44 Hanger 8 allows two variations of frame assembly: 1. Very easy 1-man assembly: the frame element is lowered from above onto the hangers on the Stand Profiles, lugs on the hangers engaging to ensure stability. They are then secured by the Cap Screws provided. 2. The frame element is slid into the hanger on the Stand Pro- file from below and secured with the Cap Screw. Removal of the screw results in the frame element dropping down. Hanger 8 in conjunction with Clamp Profile 8 32x18. Hanger 8 in conjunction with Clamp Profile 8 40x40. Attaching the Hanger from the front ensures that the frame and panel elements can be fitted without gaps. F = approx. 750 N The clearance dimension between frame and Stand Profile is 25 mm. Dimensional tolerances of ± 5 mm can be adjusted through Hanger 8. If the upper Hanger 8 is fitted to the Stand Profile and the lower Hanger 8 to the frame element, removal of Hexagon Socket Head Cap Screw M6 will result in the frame element being released. Hanger 8 1 ■ ■ Particularly robust connection between frame elements and Stand Profiles 8 ■ ■ Secured against removal by screw attachment 2 E N C L O S U R E S , G U A R D S A N D P A R T I T I O N S