Stavebnicový systém MB 9 - EN

255 7 Clip 8 St 71 Typical arrangement of a 3-part sliding door with equal-sized door segments. The sliding-door catches must be fitted correctly, so as to ensure that hands cannot become trapped in Handles or Recessed Grips. Use Clip 8 St to fasten the Sliding-Door Guide Profile to the frame profiles at the top and bottom. Next, insert the sliding doors as set out below: 1. Insert the panel element up into the desired top guide track of the Sliding-Door Guide Profile. 2. Lower the panel element into the corresponding bottom guide track. 3. Position the catch at the top to prevent the doors from being inadvertently knocked out. Sliding-Door Guide Profile ■ ■ For retrofitting sliding doors to profile constructions ■ ■ For frameless panel elements made from plastic ■ ■ Three guide tracks for door combinations The sliding-door catches are attached directly to the panel element if two or three sliding-door panels are to be moved together. Their position can be selected individually, in order to deter- mine the required opening path of the accompanying door panels and the overlap of the doors x (x min. = 25 mm). H I N G E S A N D F I T T I N G S Rubber rings are mounted on the catches as shock absorbers.