Stavebnicový systém MB 9 - EN

416 XXX JUFN DPN 12 □160 36 50.8 60 40 180 M8 160 200 Chain Counter-Reverse Unit 8 Housing cast Aluminium, black, pre-assembled 2 reversing wheels, St, with ball bearings Drive wheel with centric bore, St, z =16 reborable up to ⌀ 24 mm or ⌀ 20 mm with parallel keyway to DIN 6885 Adapter Plate with clamping elements, Al, natural Fastening screws, St, black T-Slot Nut 8 St 2xM8-50, St, bright zinc-plated 4 caps, PA, black Max. load: M D = 35 Nm Chain length in Counter-Reverse Unit 306.8 mm Notes on Use and Installation m = 3.0 kg 1 pce. 0.0.463.91 The Chain Counter-Reverse Unit is screwed directly to the Sup- port Profile. The Chain Guide Profile must be interrupted at this point in order to remove the chain from the profile groove. Drive motors can be fitted using the Adapter Plate. The sprocket wheel hub and the Adapter Plate of the Chain Counter-Reverse Unit must be machined to suit requirements. The sprocket wheel is fitted directly onto the motor gearbox output shaft which also provides the necessary bearing arrangement. Chain Counter-Reverse Unit 8 ■ ■ The versatile connection option for the motor of a chain drive ■ ■ Can be fitted at any point along the Chain return line ■ ■ Height-adjustable sprocket enables adjustment of Chain tension The Chain can be tensioned by moving the motor and slid- ing Adapter Plate Assembly within the Chain Counter- Reverse Unit if there is insuffi- cient adjustment on the Chain Reverse Units. C O N V E Y O R S