Stavebnicový systém MB 9 - EN

433 M 13 □40 97 43.5 Friction Joint 8, Standard Swivel Joint 2 Friction Joints 2 mounting plates, Al, natural 2 Button-Head Screws M8x22, St, bright zinc-plated Notes on Use and Installation M = 45 Nm m = 503.0 g 1 pce. 0.0.623.88 43.5 145 □40 Friction Joint 8, Double Swivel Joint 40 3 Friction Joints 3 mounting plates, Al, natural 3 Button-Head Screws M8x22, St, bright zinc-plated Notes on Use and Installation M = 60 Nm m = 770.0 g 1 pce. 0.0.623.89 The maximum moment load for a Standard Swivel Joint and End Swivel Joint is 45 Nm, while Double Swivel Joint 40 can carry loads of up to 60 Nm and the Double Swivel Joint 80 can accommodate 200 Nm. Friction Joints 8 ■ ■ For building customised pivot arms ■ ■ With adjustable friction brake Friction Joints can be used to build rotating cantilever arms that will stay where they are needed but can also be moved with ease and positioned with accuracy. Single and Double Swivel Joints are available. Double Swivel Joints support a larger support span and higher load-carrying capacity. The dual screw connection provides additional strength. The frictional resistance of the friction joint can also be adjusted precisely. To build custom solutions, the Joints are connected to Line 8 profiles, either via the end face (using the core bore) or via a groove at the side. When building such solutions, it is impor- tant to take note of the load limitations imposed by leverage. The preassembled sets are supplied with screws and are ready to connect. Press-fit anti-torsion features grip into the profile grooves to ensure play-free connections. M A C H I N E A C C E S S O R I E S