Stavebnicový systém MB 9 - EN

471 M 160 146.6 M6 100 160 60 M8 M10 45 13 The M10 threaded bores in the base plates can be used to connect any Adjustable Feet. The M6 threaded bores in the mounting plates can be used in combination with Automatic-Fastening Sets 8 to connect the columns to Profiles 8 160x60 4N E. Work bench designs must take into account the maxi- mum permissible torque load for the table columns of M max. = 140 Nm. Everything needed to build custom work benches Table Columns Table elements ■ ■ Electrical height-adjustment system ■ ■ Two or four table legs ■ ■ Three working heights can be saved Note IEC connector on control unit => all region- specific power lines can be used. The item Table Column Sets are the basis for customised, electrically height-adjustable work benches. The stable lifting columns support a range of working positions with a maximum travel distance of 420 mm. The ability to swap easily between sitting and standing work takes a great deal of strain off the back. Three different working heights can be saved to introduce ergonomics into everyday working life – whether different operators are using the same bench during different shifts, or users want to quickly change between typical working positions. The columns feature a lifting force of 2,000 N (Table Column Set 2 E) or 4,000 N (Table Column Set 4 E). They also exhibit a satisfying travelling speed of 25 mm/s across the entire load range. M A C H I N E A C C E S S O R I E S Fitted as standard for increased safety, a lock can be activated to prevent unintentional movement. The base plates are pre-tapped with M10 threaded bores designed to accommodate Adjustable Feet. The Line 8 grooves on the outer Telescope Profile can be used to attach load- bearing and connecting structures. Note: The duty cycle must not exceed 10%. The columns are designed exclusively for the occasional adjustment of tables and fixtures and are not intended for use in automation processes.