Stavebnicový systém MB 9 - EN

90 XXX JUFN DPN ḏ *OOPWBUJPO 2 ⌀20 Ø12 19.5 Ø20 5 Automatic-Fastening Set 8 N D40 Automatic Fastener 8 N, St, black 2 caps, PA grey Hexagon Socket Head Cap Screw M6x32, St, bright zinc-plated T-Slot Nut V 8 St M6, bright zinc-plated M = 14 Nm m = 28.5 g 1 set 0.0.493.91 Adapter 8 D40 111 673 Automatic-Fastening Set 8 N D40 can be used to connect Profiles 8 with both open and closed grooves (where designed for opening). To cover the mounting bore in the side face of profiles with closed grooves, Automatic-Fastening Set 8 N D40 contains Caps for Profiles 8 with rectangular and round cross-sections. Depend- ing on the profile attached, the Cap with a rounded or flat outer contour will be used. In the case of Profiles 8 with open grooves, no bore is needed. Consequently, the Caps are not required in this instance. Automatic-Fastening Set 8 N D40 can be used for connecting Profiles 8 D40 to other Profiles 8 D40 or – if an Adapter 8 D40 is used – to Profiles 8 with rectangular cross-sections. When used with Profiles 8 that have closed grooves, a hole with a diameter of 20 mm must be cut into the profile, 40 mm from the profile end face, for the fastening screw. However, when used with profiles that have open grooves, there is no need to machine the profiles. The self-tapping Automatic Fastener is simply driven into the profile groove from the end face. ■ ■ Connect cylindrical Profiles 8 D40 ■ ■ Suitable for open and closed grooves Note: A special 5 A/F N L-Key is available for tightening the screw connection of Automatic- Fastening Sets 8 N. Automatic-Fastening Set 8 N D40 The length of the screw in Automatic-Fastening Set 8 N D40 is matched to the thickness of Adapter 8 D40. The full length of the thread is therefore available in order to ensure that the maximum fastening force is applied. F A S T E N I N G T E C H N O L O G Y