Stavebnicový systém MB 9 - EN

187 c c b s 5 Al b [mm] c [mm] s [mm] 24 1.6 2 ‑ 4 4 ‑ 6 34 2.0 2 ‑ 4 4 ‑ 6 6 ‑ 8 8 ‑ 10 42 2.0 4 ‑ 6 12 13.5 Panel-Clamping Strip 6 Al Al, anodized m = 124.0 g/m natural, cut-off max. 3000 mm 0.0.615.01 natural, 1 pce., length 3000 mm 0.0.615.00 a Panel-Clamping Strip 6 2-4mm PP/TPE a = 22.5 mm m = 76.5 g/m grey similar to RAL 7042, cut-off max. 3000 mm 0.0.614.94 grey similar to RAL 7042, 1 pce., length 3000 mm 0.0.614.93 Panel-Clamping Strip 6 4-6mm PP/TPE a = 20.5 mm m = 71.6 g/m grey similar to RAL 7042, cut-off max. 3000 mm 0.0.614.91 grey similar to RAL 7042, 1 pce., length 3000 mm 0.0.614.90 Panel-Clamping Strips consist of two components. The first of these, an aluminium strip, locates into the profile groove and holds the panel element in place. A second strip, made of flexible plastic, is then used to secure both the panel element and the aluminium strip in the groove. If necessary, the plastic strip can be levered out in order to remove the panel element from the frame. A screwdriver is used to lever out the Panel-Clamping Strip so as to enable removal of the panel element from the frame. Panel-Clamping Strips ■ ■ Retrofit panels in closed frames ■ ■ Existing constructions do not need to be opened up ■ ■ Virtually flush with the outer surface of the profile Panel-Clamping Strips are ideal for retrofitting panel elements (primarily made of Acrylic Glass, PET-G or Polycarbonate) into an assembled profile frame. Apart from straight saw cuts, no further machining of the panel element or Panel-Clamping Strips is required. P A N E L F A S T E N E R S Panel-Clamping Strips secure the panel element so that there is a minimal offset of 2 mm to the outer edge of the profile. This produces a smooth outer wall for protective enclosures and helps reduce turbulence caused by air flows. The thickness of the panel element (s) determines which Panel-Clamping Strip is required: s = 2 - 4  /  4 - 6  /  6 - 8  /  8 - 10 mm