Stavebnicový systém MB 9 - EN

197 5 -JOF 30 57 57 Support Arm X 6-8 Angle Bracket, die-cast zinc, white aluminium Cap, PA-GF, grey T-Slot Nut V 8 St M6, bright zinc-plated Button-Head Screw ISO 7380-M6x20, St, bright zinc-plated Washer DIN 125-6.4, St, bright zinc-plated Button-Head Screw ISO 7380-M6x16, St, bright zinc-plated Washer 10.5x10.5x1.3, St, bright zinc-plated Clamping element, die-cast zinc, white aluminium Support, PUR, grey m = 198.0 g 1 set 0.0.496.01 The permissible depth of the shelf is l max. = 200 mm with a load F max. = 80 N. The distance between two Support Arms should not exceed 500 mm. Support Arms X 6-8 are suitable for clamping panel elements 4 to 10 mm thick. The tightening torque for the tensioning screw must not exceed 3 Nm. Support Arm X 6-8 is fastened in the groove in Profiles 8 using a screw connection with T-Slot Nut 8. When using Support Arm X 6-8 with Line 6 profiles, a T-Slot Nut 6 St M6 with a Button-Head Screw M6x14 is required. ■ ■ Aesthetically appealing support for shelving ■ ■ Concealed clamping system provides a secure fixing Support Arm X 6-8 Support Arm X 6-8 is a support for glass shelves or other inherently stable panel elements. Rear clamping of the panel element allows cantilever fastening to a Line 6 or Line 8 profile structure. The form of Support Arm X 6-8 corresponds to the clean contour of profile form X. The load-carrying capacity of the shelf and the holding force indicated for the Support Arms must not be exceeded. The total load applies to the indicated distances between supports with an even distribution of weight! P A N E L F A S T E N E R S