Stavebnicový systém MB 9 - EN

302 4FSWJDF XXX JUFN DPN 9 l = a - 60 mm The basic version of the door lock with Integrated Lock System 8 consists of Rotating Pawl Latch 8 and at least one Door Knob. A Rod Latch 8 is required for the rod for both the upper and lower ends of the door. The gap between the door profile and the upper door frame must not exceed 7 mm. The gap between the door profile and the lateral door frame must not exceed 5 mm. Integrated Lock System 8 From a pawl latch to a rod latch ■ ■ Locking system in a Line 8 groove ■ ■ Locks at up to three points ■ ■ Installed directly in the door profile ■ ■ Can be operated from both sides The rods of the Rod Latches move out of the core bore in the door profile and engage in the Profile 8 groove of the door frame profile adjacent. The pawl latch engages into the Profile 8 groove of the door frame adjacent. A counterbore with a diameter of 30 mm must be drilled into the door profile for holding the Integrated Lock System. A commercially available counterbore drill (3-cutter with ⌀ 11 mm guide pin or larger) or Step Drill, Universal Connec- tion 12 is required for this purpose. The ⌀ 30 mm counter- bore must be 25 mm deep. L O C K S A N D C A T C H E S