Stavebnicový systém MB 9 - EN

353 ḏ *OOPWBUJPO ḏ *OOPWBUJPO 11 160 40 160 Ø18 Adjustable Stand Foot Side Brace 8 Adjustable Stand Foot Side Brace, Al, anodized, natural 2 T-Slot Nuts 8 St M8, St, bright zinc-plated 2 Button-Head Screws ISO 7380-M8x20, St, bright zinc-plated 2 Hexagon Nuts DIN 934-M8, St, bright zinc-plated 4 Washers DIN 125-8,4, St, bright zinc-plated Button-Head Screw ISO 7380-M8x45, St, bright zinc-plated m = 655.0 g 1 set 0.0.486.18 160 20 280 120 40 Ø18 Adjustable Stand Foot 8 Adjustable Stand Foot, Al, anodized, natural 2 T-Slot Nuts 8 St M8, St, bright zinc-plated 2 Button-Head Screws ISO 7380-M8x20, St, bright zinc-plated 2 Hexagon Nuts DIN 934-M8, St, bright zinc-plated 4 Washers DIN 125-8,4, St, bright zinc-plated Button-Head Screw ISO 7380-M8x45, St, bright zinc-plated m = 795.0 g 1 set 0.0.486.17 Floor-Fastening Sets 386 The foot with unrivalled precision ■ ■ Several ways to compensate for unevenness ■ ■ Even greater stability due to additional support ■ ■ Securely anchored to the floor ■ ■ For supporting an Adjustable Stand Foot from the side ■ ■ Mechanism for adjusting angle of incline Adjustable Stand Foot 8 Adjustable Stand Foot Side Brace 8 Adjustable Stand Foot 8 can be universally used to provide the Stand Profiles of partitions, tables and rack systems with a stable connection to the floor. Various adjustment options mean that the Adjustable Stand Foot can be adapted to the properties of the floor (height, flatness). The Stand Profile can be tilted as necessary using the hexagon nuts on a threaded bolt (±3°). The Stand Profile is adjusted up and down by moving it along the profile groove. Lateral alignment on the floor is facilitated by the large diameters of the holes for the Floor Fastening Sets. The through holes for securing to the floor can be accessed when the Adjustable Stand Foot has already been fitted, so that the anchoring holes can be drilled subsequently. Adjustable Stand Foot Side Brace 8 is used to provide lateral support to an enclosure erected using Adjustable Stand Foot 8. It is inserted into Adjustable Stand Foot 8 and is also screwed to the Stand Profile. The inclination is set in the same way as the Adjustable Stand Foot, using a set screw. Used in conjunction with Adjustable Stand Foot 8, the Stand Profile can then be aligned in all planes. F L O O R E L E M E N T S