Stavebnicový systém MB 9 - EN

417 &4% 12 L chain = 2 x L + 490.8 mm 18 40 100 Chain Transfer End Ramp 8 PA Button-Head Screw T4x18, St, black T-Slot Nut 8 PA, black m = 38.0 g black, 1 set 0.0.472.01 7.8 6.5 18 8 40 Chain Transfer Slide Strip 8 &4% PE-UHMW antistatic m = 510 g/m black, 1 pce., length 2000 mm 0.0.463.95 7.8 8 6.5 18 8 40 30 Chain Transfer Slide Strip 8 with Side Guide &4% PE-UHMW antistatic m = 600 g/m black, 1 pce., length 2000 mm 0.0.463.98 Start of chain transfer: the chain is guided over the End Ramp onto the Slide Strip. The maximum permissible load on a Chain Transfer Unit is calculated from the number of supporting links. For each chain link, F max. = 6 N. Note the chain’s operating load! Calculation of the chain length: The chain length is calculated in the same way as the length of a chain drive. However, the chain length L in the Reverse Unit (U’) varies: - Pinning with ⌀ 4.8 mm bore and insertion of a fixing pin. When working with high loads, it is advisable to fix the Slide Strips securely in place: - Screw fastening using Button- Head Screw T4x18 and T-Slot Nut 8 PA (the clip mechanism needs to be removed around the area where the screw connection is implemented) Chain Transfer ■ ■ For transporting workpiece carriers directly on the Chain ■ ■ Chain runs through a Slide Strip above the groove ■ ■ For parallel running chain drives with a Synchroniser Shaft ■ ■ ESD-safe Slide Strips prevent static charges C O N V E Y O R S