Stavebnicový systém MB 9 - EN

424 4FSWJDF 30 L ⌀6.3 0.0.419.01 M4x15 13 L ≥ stroke + 74 mm 30.5 40 19 40 ⌀3.4 Telescope Profile 8 40x40 A [cm 2 ] m [kg/m] I x [cm 4 ] I y [cm 4 ] I t [cm 4 ] W x [cm 3 ] W y [cm 3 ] 5.92 1.59 10.52 11.46 14.76 5.26 5.73 natural, cut-off max. 3000 mm 0.0.440.50 natural, 1 pce., length 3000 mm 0.0.452.22 63 Telescope Securing Set 8 40x40 T-Slot Nut 6 St M6, bright zinc-plated Washer DIN 9021-6,4, St, bright zinc-plated Clamp lever, black m = 86.0 g 1 set 0.0.444.71 M4x20 M8 M6x16 12 □40 □30 □40 8 M4x12 Telescope Connection Set 8 40x40 Telescope cap 8 40x40, PA, black Telescope sliding cap 8 40x40, PA, black Telescope connecting plate 8 40x40, die-cast zinc, white aluminium Cap Screw DIN 912-M6x16, St, bright zinc-plated 2 Cap Screws DIN 912-M4x12, St, black Square nut DIN 562-M8, St, bright zinc-plated 2 Countersunk Screws DIN 7991-M4x20, St, bright zinc-pl. m = 138.0 g 1 set 0.0.440.54 Profile 6 30x30 must be 14 mm shorter than Telescope Profile 8 40x40 in order that it can be inserted completely in the assembled telescope, and the stroke thereby maximised. Max. load in telescope direction: 500 N Telescope 8 40x40 ■ ■ Telescope function enables variable profile length ■ ■ Clamp lever fixes easily in place ■ ■ Maximum load up to 500 N Overall length L of the telescope: Outer profile for constructing telescope profiles of variable length for adjusting the height or inclination of fixtures and equipment. A profile 6 30x30 must be used for the inner profile. The outer profile can be connected directly to a profile groove via its end face or using fastening elements (Hinges, heavy duty, etc.). Line 6 components are suitable for connecting the inside profile. The inner profile, which is guided by a sliding bearing in the telescope, is secured with the Telescope Securing Set. M A C H I N E A C C E S S O R I E S