Stavebnicový systém MB 9 - EN

464 13 Pneumatic- Connector a b c 8 G 1 / 8 ⌀ 4.9 mm M8x16 6 mm 8 G 1 / 4 ⌀ 4.9 mm M8x16 8 mm 12 34 G⅛ Ø4.5 M8 14 Pneumatic Connector 8 G1/8 St M = 12 Nm m = 15.0 g bright zinc-plated, 1 pce. 0.0.411.69 15 37 G¼ Ø4.5 M8 17 Pneumatic Connector 8 G1/4 St M = 12 Nm m = 18.0 g bright zinc-plated, 1 pce. 0.0.411.68 40 40 Pneumatic Connecting Set 8 G1/8 St Pneumatic Connector, St Cap, PA-GF Seal, NBR m = 19.0 g black, 1 set 0.0.411.73 Pneumatic Connecting Set 8 G1/4 St Pneumatic Connector, St Cap, PA-GF Seal, NBR m = 24.0 g black, 1 set 0.0.411.72 Supply of compressed air to a central bore by means of a Pneumatic Connecting Plate with Pneumatic Connection fitted to the end face. Depending on the type of application, the profile may need to be machined. When using a Pneumatic Connec- tor outside the core bores, a standard O-ring seal must be used. Supply of compressed air to the profile cavity by means of a central bore in the T-slot in conjunction with a Pneumatic Connecting Set. The seal is provided at the taper seat of the Pneumatic Connector. When using the Pneumatic Connector (with inner thread c) in conjunction with the core bore, an appropriate thread of length (b) or, in the case of connections made at 90°, bores of diameter (a) must be provided, and a T-Slot Nut St to retain the fitting. Pneumatic Connections ■ ■ For connecting compressed-air conduits to profile bores ■ ■ Can be fitted to the desired point on the profile ■ ■ For pneumatic connections G1/8 and G1/4.  M A C H I N E A C C E S S O R I E S