Lineární jednotky - EN

0.0.463.56 0.0.666.61 0.0.666.61 0.0.337.93 0.0.337.92 0.0.472.29 0.0.337.93 100 ⌀32 ⌀72 120 Synchroniser Shaft Equaliser Coupling VK32 2 half shells, St, bright zinc-plated 8 Hexagon Socket Head Cap Screws DIN 912-M10x30, St, bright zinc-plated and waxed 8 screws M6x25, St, bright zinc-plated m = 2.8 kg 1 set 0.0.472.29 ■ ■ Compatible with item Synchronising Shaft Profile VK32 ■ ■ Connecting Shaft for drive ■ ■ Simple adjustment thanks to Equaliser Coupling Connecting Shafts are used to provide a torsionally rigid connection between the mechanical drive elements and the corresponding Coupling Half. The Connecting Shafts are inserted into the drive elements until they come up against the stop of the Snap Ring. The clampable Coupling Half is slipped onto the free end of the shaft and clamped axially such that the length of the coupling matches the length of the Coupling Housing, and the Coupling Inserts are not under any axial load. When using synchronising shafts to transfer torque, it may be necessary to ensure the connected drives can be adjusted during installation. The Synchroniser Shaft Equaliser Coupling can be used to divide a synchronising shaft in two and then create a friction- based connection between the two shaft sections. The snap rings W32 should be used to secure the synchronis- ing shaft axially between the drive elements. Accessories for Synchronising Shaft Profile DRIVE ELEMENTS