Lineární jednotky - EN

133 20 a 100 15 Power Cable BL SC1 04/5 Smallest possible bend radius (when fixed in place) 46 mm Smallest possible bend radius (repeated movement) 87 mm a = 5000 mm m = 1.0 kg orange, 1 pce. 0.0.703.51 Power Cable BL SC1 04/10 Smallest possible bend radius (when fixed in place) 46 mm Smallest possible bend radius (repeated movement) 87 mm a = 10000 mm m = 2.0 kg orange, 1 pce. 0.0.704.65 Power Cable BL SC1 04/15 Smallest possible bend radius (when fixed in place) 46 mm Smallest possible bend radius (repeated movement) 87 mm a = 15000 mm m = 3.0 kg orange, 1 pce. 0.0.704.66 Cables ■ ■ Ready-to-connect Power and Data Cables in standard lengths ■ ■ Suitable for drag chains and with EMC shielding ■ ■ Colour-coded and tamperproof Note: Detailed nomenclature for the cables can be found in the Technical Data section. If you are using item MotionDesigner ® to configure a complete system, the software will auto- matically select the correct cable. To prevent interference, the interplay between the Motor and Controller is handled via two separate cables: The orange Pow- er Cable feeds power to the Motor, while the green Data Cable is reserved for data transfer. Different connectors and colour coding make the separate types of cable unmistakeable on site and ensure they are not connected to the wrong terminal. All cables are available in standard lengths. The abbreviation BL in a product name indicates that the cable can be connect- ed to BL-series Controllers. Data Cables feature EMC shielding and must be ordered as ap- propriate to the Motor. The letters RSC indicate that a cable is for use with Motors that have a resolver, while the letters AKSC indicate suitability for Motors with an absolute encoder. When selecting Power Cables for C-series Controllers, it is important to choose the correct type of cable for the load involved. CONTROLLERS