Stavebnicový systém MB 9 - EN

111 2 Ø40 2 40 Adapter 8 D40/D40 Die-cast zinc m = 28.0 g white aluminium, similar to RAL 9006, 1 pce. 0.0.489.88 Ø40 40 2 40 Adapter 8 40x40/D40 Die-cast zinc m = 42.0 g white aluminium, similar to RAL 9006, 1 pce. 0.0.489.86 2 40 80 Ø40 Adapter 8 80x40/D40 Die-cast zinc m = 84.0 g white aluminium, similar to RAL 9006, 1 pce. 0.0.489.87 Adapter 8 D40 ■ ■ Connect together cylindrical Profiles 8 D40 ■ ■ Combine rectangular Profiles 8 with Profiles 8 D40 The gap that would result when connecting the rounded outer surface of Profiles 8 D40 and the straight profile end faces (or any other flat components) is closed off completely by Adapter 8 D40. A smooth transition is made from the outer contour of the profile to the connecting face of the second profile. Profiles 8 D40 can be connected with other Profiles 8 D40 or with Profiles 8 40x40 or 80x40 using Line 8 fastening ele- ments. In contrast to connecting two profiles with rectangular cross-sections, suitable adapters must be used for Profiles 8 D40. Standard-Fastening Set 8 and the Automatic-Fastening Set 8 N D40 are well suited for right-angled profile connections. When calculating the cut-off length of the profiles, the 2 mm wall thickness of Adapters 8 D40 must be taken into account. Adapters 8 D40 also serve as radial seals. In completely covering the end face of the profile, they seal the openings of the profile cross-section. F A S T E N I N G T E C H N O L O G Y Universal-Fastening Set 8 can also be used when connecting the rectangular end face of a Profile 8 to a Profile 8 D40. It is important to ensure that, due to the wall thickness of the adapter, the distance from the centre of the 20 mm dia. mounting bores of the Universal Fastener to the end of the profile must not exceed 18 mm. In addition, the anti-torsion feature of Universal Fastener 8 must be removed.