Stavebnicový systém MB 9 - EN

132 XXX JUFN DPN ḏ *OOPWBUJPO 2 19 37 Ø6.8 40 Connection Profile 8 40 Al, anodized (The values apply for an individual profile section and not for a pair) A [cm 2 ] m [kg/m] I x [cm 4 ] I y [cm 4 ] I t [cm 4 ] W x [cm 3 ] W y [cm 3 ] 8.97 2.42 5.73 19.85 4.59 2.90 6.96 natural, cut-off max. 6000 mm, 1 pair 0.0.422.35 natural, 1 pair, length 6000 mm 0.0.453.90 0.9 28.6 6.9 32 Cover Profile 32 Al, anodized A [cm 2 ] m [kg/m] 0.41 0.11 natural, cut-off max. 3000 mm 0.0.420.43 natural, 1 pce., length 3000 mm 0.0.452.01 2.5 7.4 □12.5 □17.8 M10 Captive Nut M10 Cage and square nut, St m = 8.0 g bright zinc-plated, 1 pce. 8.0.004.02 Hexagon Socket Head Cap Screw DIN 912 M8x60 159 Hexagon Socket Head Cap Screw DIN 912 M10x60 159 Connection Profiles Connect Profiles 8 to make extra strong supports ■ ■ Simple engineering for stable composite profiles ■ ■ For open and closed supports ■ ■ Suitable Cover Profile for easy-to-clean surfaces Connection Profile 8 40 is supplied in pairs and machined with 11 mm ⌀ bores (bore spacing 200 mm) for the fastening screws. The use of Captive Nuts (designed to fix positions and prevent Connection Profiles 8 160 and 8 240 are supplied in pairs and machined with bores for the DIN 912-M8x60 fastening screws and DIN 934-M8 Hexagon Nuts. The Connection Profile Braces 8 are ready-to- install kits complete with screws and nuts. F A S T E N I N G T E C H N O L O G Y torsion) allows the Connection Profile to be fitted from one side. DIN 912-M10x60, M10x100 or M10x140 Hexagon Socket Head Cap Screws (tightening torque M = 34 Nm) are inserted at the relevant predetermined positions to join Connection Profiles. The joint and/or screw heads and Captive Nuts can be covered over with a dust-tight Cover Profile 32.