Stavebnicový systém MB 9 - EN

315 10 Property Value Test standard Density 1.27 g/cm 3 D 1505 Tensile strength 50 N/mm² DIN 53455 Elongation at tear 54 % DIN 53455 Modulus of elasticity in tension 2200 N/mm² DIN 53455 Impact resistance (without notch) doesn’t break DIN 53453 Vicat softening temperature 82 °C DIN 53460 Coefficient of thermal expansion 6.8 x10 -5 K -1 DIN 53752 Construction material class B 1 DIN 4102 Refractive index 1.57 n D 20 DIN 53491 Luminous transmission index clear / tinted 88% DIN 5036 Surface resistance ≥10 16 Ohm D 257 PET-G 4mm Thickness tolerance ± 4% m = 5.13 kg/m 2 clear, cut-off max. 3020x2020 mm 0.0.492.07 clear, 1 pce. panel dimensions. approx. 3050x2050 mm 0.0.492.03 PET-G 5mm Thickness tolerance ± 4% m = 6.40 kg/m 2 clear, cut-off max. 3020x2020 mm 0.0.493.77 clear, 1 pce. panel dimensions. approx. 3050x2050 mm 0.0.493.76 PET-G 6mm Thickness tolerance ± 4% m = 7.70 kg/m 2 clear, cut-off max. 3020x2020 mm 0.0.492.81 clear, 1 pce. panel dimensions. approx. 3050x2050 mm 0.0.492.80 PET-G 7mm Thickness tolerance ± 4% m = 8.98 kg/m 2 clear, cut-off max. 3020x2020 mm 0.0.492.08 clear, 1 pce. panel dimensions. approx. 3050x2050 mm 0.0.492.04 Materials used in all the following products: PET PET-G Transparent and free from distortion ■ ■ Best optical properties ■ ■ Impact-proof ■ ■ Resistant to chemicals PET-G (glycol-modified polyethylene terephthalate) is an impact-resistant, clear plastic used for constructing machine casings, protective housings and partitions, and is suitable for both indoor and outdoor use. This highly transparent material exhibits a far higher resistance to impact than acrylic glass and is also easier to work with. It displays better optical characteristics than polycarbonates and is more resistant to chemicals. P A N E L E L E M E N T S