Stavebnicový systém MB 9 - EN

435 s 5 13 s 2 1 0.0.622.12 A B A B L PA L L PB L 13 S 1 = 2 - 3.2 mm S 2 = 3.2 - 4 mm L A [mm] A - 10 A - 26 L B [mm] B - 10 B - 26 20 40 11 Frame Profile 8 40x20 Al, anodized m = 880 g/m natural, cut-off max. 6000 mm 0.0.616.95 natural, 1 pce., length 6000 mm 0.0.616.93 40 22 Corner-Fastening Set Frame 8 40x20 Corner fastener, die-cast zinc, RAL 9006 white aluminium 4 Hexagon Socket Head Cap Screws M4x20, self-tapping, St, bright zinc-plated Cap, PA-GF, grey m = 54.0 g 1 set 0.0.618.61 Ø6 Retaining Cord D6 NBR m = 10 g/m grey, cut-off max. 20 m 0.0.622.12 grey, 1 roll length 20 m 0.0.621.77 Calculating the profile cut-off length: L PA = A - 44 mm L PB = B - 44 mm The cut-off dimensions of panel elements (L A , L B ) are depend- ent on the thickness s. ■ ■ Stable, continuous edging for panel elements ■ ■ For drawers or workpiece carriers ■ ■ As edge protection for shelving Frame Profile 8 40x20 An external Profile 8 groove can be used to secure the frame profile to the basic frame of the table or material trolley, e.g. using Angle Locking Bracket 8 80x40. The Corner-Fastening Set Frame is screwed into the screw channels in the frame profile using the self-tapping screws without any need for profile processing (M = 2 Nm). Shelving at the workplace and on the material trolley ensures parts are available to users when they need them. Workpiece carriers, enclosed in a frame, may be employed on transfer units to protect the goods being transported. Frame Profile 8 40x20 provides a stable means of holding and securing a plastic or metal panel element (up to 4 mm thick). The corner fasteners connect seamlessly with the frame M A C H I N E A C C E S S O R I E S profiles and enable panels to be inserted easily across both without need for processing. After the frame has been closed, the panel is secured with a flexible Retaining Cord to prevent movement. Installation tip: It is best to moisten the Retaining Cord with soapy water to ensure it can be pressed in easily.