Stavebnicový systém MB 9 - EN

517 &4% 14 4.1 10 5 Potential Equaliser 5 &4% Die-cast zinc Grub screw DIN 916-M3x12, St, black m = 1.0 g bright zinc-plated, 1 pce. 0.0.464.45 6.2 15 5.6 Potential Equaliser 6 &4% Die-cast zinc Grub screw DIN 916-M4x16, St, bright zinc-pl. m = 4.0 g bright zinc-plated, 1 pce. 0.0.459.65 9.2 7.9 M6 Potential Equaliser 8 &4% St Grub screw DIN 915-M6x12, St, bright zinc-pl. m = 4.7 g bright zinc-plated, 1 pce. 0.0.265.77 Potential Equaliser ■ ■ For safely equalising electrostatic charges in profiles ■ ■ Additional ESD-safety – can be retrofitted to constructions Potential Equalisers 5 and 6 are swivelled into the Profile Groove and then pushed against the joint. The grub screw must be screwed in with light pressure on the key, until it rests against both profiles and nudges the Potential Equaliser out of its original position. Potential Equaliser 8 is twisted into the profile groove, tilted to an angle of 45°, and the grub screw driven in so as to bite jointly where the two profiles meet, thus making contact between them. The Potential Equaliser ensures that possible charge buildups are balanced out between the individual profiles of a construc- tion. It can be retrofitted to the profile groove. Fitted at joints, it destroys the insulating anodized layer and creates an electri- cally conductive connection. The Potential Equaliser cannot be considered an electrical con- nection suitable for forming part of a safety circuit. I N S T A L L A T I O N E L E M E N T S