Stavebnicový systém MB 9 - EN

617 16 Couplings 623 Parallel arrangement of Ball Screw Units in connection with Bevel Gearboxes. Direct drive connection with Adapter Plate 120x80. Various drives adaptable using the Adapter Shaft and Adapter Flange Universal. Direct connection to Bevel Gearbox WG via Adapter Plate 80x80. Drives can be connected to Bevel Gearbox WG with the Coupling Housings. Connection dimensions of the Bearing Blocks at the floating (L) and fixed (F) bearing ends. Depending on the drive type selected, the Bearing Blocks and drive holders may need to be machined. The hub is reborable up to max. ∅ 17 mm or ∅ 14 mm for insertion of a parallel keyway as per DIN 6885 T1. The service life of the spindle / drive nut combination can be calculated as a function of the axial load and drive speed. Suitable for combination with all item linear slides. The necessary guidance for the yoke must be provided by the external linear slide. The driving nut is suspended on gimbals to prevent strains and allow for slight errors in alignment with the load. The yoke adapter can be matched to the height of the slide by means of grub screws DIN 913-M5x5. The position of the connecting thread M8 for securing the slide can be either central or offset relative to the slide depending on the position the yoke adapter is used in. Calculation of Service Life M E C H A N I C A L D R I V E E L E M E N T S