Stavebnicový systém MB 9 - EN

626 16 22.5 12 ⌀30 ⌀30 ⌀6 DIN ISO14 6x11x14 11 Coupling D30 Coupling Half D30 D6 AI, reborable up to ⌀ 16 mm Coupling Half D30 VK 14 Coupling Insert D30, hardness 80 Sh A Torque range: M D < 8 Nm Elasticity dyn. = 0.318 °/ Nm Elasticity stat. = 0.955 °/ Nm Perm. offset axial = 1.00 mm Perm. offset radial = 0.21 mm Perm. offset angular = 1.1 ° m = 52.0 g 1 set 0.0.628.83 Ø55 DIN ISO14 6x11x14 30 46 16.5 Ø8 ⌀55 Coupling D55 Coupling Half D55 D8, reborable up to ⌀ 28 mm Coupling Half D55 VK14 Coupling Insert D55, hardness 98 Sh A Torque range: M D < 50 Nm Elasticity dyn. = 0.009 °/ Nm Elasticity stat. = 0.028 °/ Nm Perm. offset axial = 1.40 mm Perm. offset radial = 0.10 mm Perm. offset angular = 0.9 ° m = 280.0 g 1 set 0.0.628.84 45 66 DIN ISO14 6x26x32 Ø80 22 Ø12 ⌀80 Coupling D80 Coupling Half D80 D12, reborable up to ⌀ 45 mm Coupling Insert D80, hardness 98 Sh A Coupling Half D80 VK32 Torque range: M D < 200 Nm Elasticity dyn. = 0.003 °/ Nm Elasticity stat. = 0.008 °/ Nm Perm. offset axial = 1.80 mm Perm. offset radial = 0.12 mm Perm. offset angular = 0.9 ° m = 924.0 g 1 set 0.0.628.85 Coupling Sets ■ ■ Rigid torque transmission ■ ■ Elastic Coupling Inserts, easy to install ■ ■ Prepared multi-spline connections enable plug-in connection The Coupling Halves with multi-spline hubs VK14 and VK32 can be connected with the corresponding Connecting Shafts or mechanical drive elements without the need for machining. In the case of Coupling Halves with bores, simple machining (reboring, parallel keyway, etc.) is required to ensure they match the drive output shaft of gear- boxes/motor drives. The Coupling Halves are connected to the Coupling Inserts, which exhibit an elasticity that is configured for the item drive elements. In conjunction with Ball Screw Units driven with stepper motors, the flexible couplings make it possible to decouple the moving masses of the spindle and drive. M E C H A N I C A L D R I V E E L E M E N T S