XMS – the item machine cabins 2

2-10 34 2 2 77 18 16 Panel-Clamping Strip 8 Al Al, anodized m = 238 g/m natural, cut-off max. 3000 mm 0.0.495.05 natural, 1 pce., length 3000 mm 0.0.493.53 Panel-Clamping Strips con- sist of two articles. The first of these, an aluminium strip (0.0.495.05), locates into the profile groove and holds the panel element in place. A second strip, made of flexible plastic, is then used to secure both the panel element and the aluminium strip in the groove. If necessary, the plas- tic strip can be levered out in order to remove the panel element from the frame. A screwdriver is used to lever out the Panel-Clamping Strip so as to enable removal of the panel element from the frame. Panel-Clamping Strips ■ ■ Retrofit panels in closed frames ■ ■ Existing constructions do not need to be opened up ■ ■ Virtually flush with the outer surface of the profile Panel-Clamping Strips are ideal for retrofitting panel elements (primarily made of Acrylic Glass, PET-G or Polycarbonate) into an assembled profile frame. Apart from straight saw cuts, no further machining of the panel element or Panel-Clamping Strips is required. PANEL ELEMENTS Panel-Clamping Strips secure the panel element so that there is a minimal offset to the outer edge of the profile. This pro- duces a smooth outer wall for protective enclosures and helps reduce turbulence caused by air flows. The thickness of the panel element (s) determines which Panel-Clamping Strip is required. s = 2 - 4 / 4 - 6 / 6 - 8 / 8 - 10 mm