Angled belt conveyors

Angled conveyors are mainly intended for the transport of piece goods of various properties, especially where there is a need for a height change in the flow of the material (eg. when the products are delivered to the machine magazine). Angled conveyors may, under certain conditions, also be fitted with a C-type drive with an in-line gear or CTR with a drum drive. For more information, please contact a technical adviser.

Inclined Belt Conveyor 40 CD

Standard parameters
Conveyor Total Length	1 000 – 3 000 mm
Belt Width	120 – 500 mm
Conveyor Load	10 kg/m
Drive	3 x 400 V (1 x 230 V)
Belt Speed *	3 - 30 m/min
Conveyor Belt	PVC, PU, textile, modular
Operating temperature	10 – 80 °C
Pulleys Diameter (sprockets)	depends on the Belt Type and the chosen Applications
* Possibility of Speed Regulation by Frequency Converter in the Range from 40 to 150% (Nominal Speed =100%). The above figures are standard. Other values on request.

Demand form

Questionnaire to perfrorm angled belt conveyor 40 CD

Inclined Belt Conveyor 80CD

Standard parameters
Conveyor Total Length	1 000 – 5 000 mm
Belt Width	120 – 500 mm
Conveyor Load	10 kg/m
Drive	3 x 400 V (1 x 230 V)
Belt Speed *	5 - 54 m/min
Conveyor Belt	PVC, PU, textile, modular
Operating temperature	10 – 80 °C
Pulleys Diameter (sprockets)	depends on the Belt Type and the chosen Applications
* Possibility of Speed Regulation by Frequency Converter in the Range from 40 to 150% (Nominal Speed =100%). The above figures are standard. Other values on request.