Chain belt conveyors

Plate conveyors are designed mainly to transport piece goods of various properties, particularly where the belt resistance to higher temperatures or to mechanical damage and minimization of the installation space is required. They are suitable both for individual use and for installation in larger transport units, production and assembly lines. Conveyor design allows you to solve several line sections (bends, broken sections, etc.) through one drive. They feature a light and solid construction made of anodized aluminum profiles, a modern design and a great deal of variability.

Chain belt conveyor

Destičkový dopravník Destičkový dopravník - výkres

Standard parameters
Length of the conveyor 600 – 10 000 mm
Width of belt 31,8 – 190,5 mm
Conveyor load 20 kg/m
Drive 3 x 400 V (1 x 230 V)
Belt speed * 4 - 50 m/min
Chain belt conveyor POM, PC, stainless steel
Operating temperature 10 – 80 °C
Pitch diameter gear wheels according to conveyor type and selected application
* Speed control via a frequency inverter in the range of 40 - 150% (rated speed=100%) is possible.
The above figures are standard. Other values on request.


Demand form

Questionnaire to perform chain belt conveyor


  • conveyors are manufactured according to customer requirements, ie. "made-to-measure"
  • the possibility of performing special technological or manufacturing operations directly on the conveyor (eg. blowing, degreasing, draining the oil into the tub under the conveyor, etc.)
  • small turning radius
  • possibility of selecting different types of plate materials with different properties and areas of use
  • high service life of the belt
  • various types of plate cells designed for a wide range of applications (eg. food, oil resistant or adhesive, gray, blue, white)
  • if the belt is damaged, only the damaged parts are replaced (in the long run a large saving of financial costs)
  • conveyor skeleton made of item modular system profiles with the possibility of easily connecting other profiles or complementary technologies, eventually possibility to modify the conveyor in the future

Technical solution

  • basic frame of conveyor made of aluminum groove profiles of the modular system item
  • drive and driven plastic (steel) gears
  • aluminum drive and driven sprockets with tilting ball bearings for adjusting and tilting the conveyor belt
  • drive made up of a compact unit, consisting of a three-phase asynchronous electric motor and a worm gearbox. For heavier loads, use helical-bevel gears
  • plate strap in 1/2 "to 3,15" spacing modules connected to each other by means of steel pins. Belt Materials: POM, PC, stainless steel - for a more detailed description of belts, see Chapter 10.
  • plastic sliding guide under the top belt to support and reduce friction
  • support rollers of 50 mm diameter (Al or PVC) located under the lower belt section at longer conveyors (over 2 m) to prevent it from being slammed
  • the speed is constant or can be controlled using a frequency inverter
  • the base, as well as the base frame, made of aluminum grooved sections of the modular system item. The variant is also adjustable in height (manual, drive) or sloping design.
  • delivery possible including electrical connection with motor starter or frequency inverter

Optional accessories

  • electrical connection of conveyors including elements such as optical sensors with reflector, safety STOP buttons, frequency inverter, motor starter etc.
  • base
  • motor 1 x 230 V
  • plastic sliding guide with raised edges for material guidance
  • side guides adjustable only horizontally or horizontally and vertically
  • mechanical end stops